Sos Roofline Systems

Posts Tagged ‘Electrical safety’

Replacing a broken bulb is quite a risky process and you need to take some safety precautions while doing this. The most important thing required to be done is to cut the power supply of that particular fixture. In case you are repairing a bulb of a lamp then remove the plug of the lamp and in case it is a fixture then cut the power from corresponding electrical panel.

Next put on a pair of protective leather gloves in hands and safety glasses to protect your eyes especially if you are working on an overhead fixture. A hat also helps in keeping any remaining glass off your head. You may also put down a tarp to catch any remaining broken glass from the old bulb if you are removing a broken light bulb from a ceiling or wall light fixture.

One way is to put the pliers as much as possible into the base that is broken using your hands. Separate out the handles and put some force on the bulb base with the help of pliers and turn it in anti-clockwise direction.

With this force the broken base may come out and you need to be careful that you don’t break the fixture during the process. Also, if this process does not work out, use some other alternative. One more is stated below.

Carefully insert a small screwdriver between the bulb base and the socket. Bend the bulb base slightly inward that is enough to allow a needle nose plier to get a grip.

Hold the pliers tightly and begin to turn the base out, counter-clockwise. You could feel some resistance. When you feel the resistance, slightly attempt to rotate it clockwise and then again back counter-clockwise. This twisting would enable the broken light bulb to be unscrewed and removed from the light socket without damaging the socket.

Once the elimination process is complete, check carefully if all the broken pieces are removed or not. After that, fix a new bulb inside the socket and switch on the power to check whether it’s operating fine or not. In case the bulb does not lit then remove the bulb and insert it again.

To prevent the bulbs from breaking in the future, never over tighten them while screwing into the light socket. Screw them just till the point where you feel slight resistance and test to see if the light works without flickering. If it does, leave it as it is. If it flickers, then tighten the light bulb just until the point the flickering stops.

Scott Rodgers is an author with ample experience in electricians work all across the nation. His exemplary guidance has generated business for a lot many Lodi Electricians and Concord Electricians .

In modern era each and every individual is using electronic devices in day to day life. We are now badly dependent on electricity and if it will continue like this only, one day electricity consumption will become more than generation. So to avoid such situation we should use energy saving devices such as Smart Meters. Let us now discuss how Smart Meters can change our life.

Smart Meter is an advanced Meter that transmits electricity consumption back to utility company through a network. By using this Meter utility providers can do better outage detection and more efficient power restoration.

Smart Meter can help you in saving 10 percent of your electricity bills. The companies using this Meter can put forward different electricity rates and multiple plans for using electricity that will be in your favor and will also save money in the form of electricity bills. Companies also offer discount if you want to use more electricity during evening hours or during weekends.

People using such Meters take maximum advantage of electricity during peak hours and does not use it much at non peak hours. It is one of the best ways to keep electricity for our future generation.

With the help to these Meters you can have continuous track on electricity used in your house. You can easily determine where the maximum amount of electricity is used and at what time, via Internet. The service providers can now easily solve any of your problems even without sending a person as they have full details of your consumption and operations.

Earlier we use to have rough idea of carbon emitted and we never bothered for it. But now after installing Smart Meters, a person can have continuous track on amount of carbon being emitted and can really reduce it by his efforts. So these Meters make us aware and finally help in conserving more.

Initially the cost of these Meters was very high but now it is reduced a lot, so many of the companies are installing it now. For these Meters, a user can easily make the payment by using any of the bank cards.

Clearly, the benefits are huge both for the energy consumers and the providers. This is the biggest reason for its popularity. Service providers are now able to understand user’s need more clearly.

Scott Rodgers is an author with ample experience in electricians work all over the country. His exemplary guidance has generated business opportunities for a lot many East Northport Electricians and Scappoose Electricians .

Wonder why sometimes you witness an absence of electricity from the sockets,outlets and appliances of one room while the others continue to receive the supply? To find the solution, always head first to the breaker box panel. The breaker box location off course should be a known fact among the family members as well as the tenants.

Now and then, a casual examination of the breaker box can always be performed by you and you don’t need to be a professional to handle the task. Some basics if followed correctly would ensure a smooth supply of electricity to different sections of the home.

The breaker box is generally an electric panel that controls the electricity supply to your home. Each area/room is governed by a circuit breaker switch which controls the voltage level and the relative ampere load of that particular area as well as the affiliated appliances.

The panel constitutes the circuit breaker switches and the traditional electrical fuses. The amperage load information is provided on the breaker tip. In addition, the alternative electrical fuses usually find a place in a normal breaker box.

Check that all the breakers are positioned in synchronization with each other i.e. they’re facing the same direction. If that is not the case then change the position of the odd switch such that it is similar to the direction of the others. Plus, go for a custom on/off with all the switches one by one and observe if they’re working correctly or not.

A fuse is a cartridge or a screw-in device that holds a metal strip indicator with a certain predefined ampere load( that is inscribed on the fuse body).If the maximum load limit has entered into catastrophic territories, the metal strip breaks off and consequently the power supply is interrupted immediately.

To check the normal functioning of the fuse, a multimeter( available in the market) could prove handy. Set multimeter to R (Resistance) and check the reading .If it is 1, it means fuse is offering infinite resistance and not allowing electric current to pass through it. This would indicate an incorrect operational state of the fuse( short circuit).

Hence , inculcating a regular inspection( in a span of 3-4 days) of the electrical breaker box in your itinerary would ensure maximum protection to you and your family.

Scott Rodgers is a great author when it comes to extensive electrician works. His exceptional expertise has been fueling business for a host of workers, ranging from Davison Electricians (Need one? click here!) to Westerville Electricians (Need one? click here!).