Sos Roofline Systems

Posts Tagged ‘energy savings’

Can you imagine getting electrical power from balloons? This is what Cool Earth of Livermore, California, has designed the next generation of solar collectors to look like. The basic concept hasn’t changed; convert sunlight into electric power using solar cells; but the packaging has changed, and this is where the solar balloons are unique.

The current installed solar plants use flat-panels. Each panel is heavy, large, easily damaged, and costly to repair. This means the cost to produce a watt of electricity is 5-7 times greater than using natural gas and is not a feasible alternative to fossil fuels. This is no longer true with the Cool Earth solar balloon system.

The system’s design is centered on the concept of an air-filled Mylar balloon like a children’s birthday balloon. One half of the balloon is a highly reflective mirror-like surface and the other half is transparent. The solar cell is located at the center of the clear side allowing sunlight to pass by, be collected and focused back onto the solar cell.

With the new design comes and the ability to increase sunlight concentration and reduce expensive solar cell material by 300 to 400 times. This cost reduction will bring the price down to a mere one dollar per watt. To give that some context: a typical flat-panel PV(photovoltaic) system on a residential rooftop is about seven to eight dollars per watt.

Each balloon is eight feet in diameter and can withstand over 100 mile per hour winds. The balloons are linked together in series, with the initial installation able to produce 10 megawatts, enough to power 3,500 homes during the day.

Like all solar designs, the system will not be used as a base power plant because the energy collected during the day cannot be economically stored for nighttime operations. On the other hand, the system will be an ideal “peaker” power plant to be used during the hot summer months when energy demands are high.

Another of the aspects we find most interesting at Green Products is how the balloons are linked together with wire, wood and sheet metal. We are also impressed at the lack of limitations that are imposed when the systems are installed and how they eliminate the destructive heat that destroys most solar cells. Soon this system will be installed and go online. Check it out.

Michael