Sos Roofline Systems

Posts Tagged ‘garage doors’

One can choose between primed and unprimed hardboard garage doors. Although the American Hardboard Association offers advice on garage doors that may be old, they also provide information for finishing doors if they’ve just been bought. Hardboard’s surface is ideal for use on garage doors for field coatings since they don’t have any grains or knots to shorten its life.

The hardboard of the garage door is usually made from wood. Therefore, if you want to ensure its durability, as well as the durability of its field applied coating; it is extremely important that the initial coat be done properly, and then on be maintained. The surface coating not only protects the door, but also adds much to its beauty. The recommendations work as a guide so that both the functions are achieved so that the hardboard garage doors get a reasonable service life. To explore the area of garage doors browse our site on roller door.

To ensure that the garage door stays well protected and lasts long, the following tips must be kept in mind. Unprimed hardboard garage doors must be coated immediately after installation, while the primed ones can be given up to 15 days between installation and finishing. The right kind of paint or stain needs to be used which is particularly meant for exterior use on the hardboard from a reputable coatings maker.

It is highly recommended to read through the list of materials used for the paint’s production, to figure the product quality. It is suggested to pick the one which comes with warranty. For exterior use on the hardboard garage doors, select the finishing systems as soon as possible. An oil or alkyd based primer that will be compatible with the top coat, and be able to seal the entire exposed surface of the door, is recommended as the primer. If other than oil alkyd primer is intended to be used it must be a special formulation for hardboard and must be so stated on the label of the container.

While painting the top most layers, consider using acrylic latex, oil base or alkyd base. Staining will damage the smooth hardboard and it is suitable only for textured hardboard. Use opaque acrylic latex stains. If there is any dirt particle present on the surface of the hardboard, it will affect the result of the staining in a negative way. You are reading valuable tips on garage doors and can learn more at garage door repair.

The primer requirements, hardboard surface temperature, rate of spread and recommended application procedures vary from one brand to the other and it is advisable to understand what the maker of the brand you are using has to say. Most professionals recommend a minimum film thickness of four millimetres once the surface coats have dried.

Applying the finishing at a spread rate comparable to that given on the back of the label will be the best way to achieve this. Different doors have different numbers of coats which are required to be put on the surface and they are given below. Two un-thinned finish coats will do the trick after a layer of primer and prior to a layer of paint or stain in case of an unprimed door. An alkyd oil primer will be the best hope for spot priming any damaged area. Application of finish coats is an important step but should be done only after the primer has dried.

Successful completion of the finish means that all that is left is cleaning and applying the final touches to the door. When the finish becomes badly eroded and thin, clean and prime the areas where the substrate is showing through, followed by complete pruning and finish coating. In case the substrate is still covered, all you need to do is apply a finish coating.

If you have a garage with an overhead door, you may already be aware of the big hassle of getting it repaired and it is advisable you regularly get it checked for any sort of problems. If you notice some sort of defect in your overhead garage door’s movement, a quick assessment of the problem will lead to one of the problems. The chief abnormality in an overhead garage door is its improper movement which could be due to a host of causes like the rollers becoming rough, the hinges and the mounting screws loosening or the springs losing their tensile strength.

The overhead variety of garage doors can be broadly classified into two categories. The two categories are very similar; the first is a one piece door which has a strong and lightweight panel along with several hinged horizontal panels, the door slides up and down and the panels fold and unfold along the process respectively, the second category are more than just a single piece door and they move in a complicated way. Both the models need to be serviced from time to time. This garage doors article is proudly brought to you by commercial doors.

The first step while inspecting the door is to check the hardware and the hinges, rollers and brackets. Ensure that the holding screws are tight and their bolts are well in place. If a screw has broken ends, then it will not be safe to use it anymore and a carriage bolt should be put in its place. The carriage bolt is put inside the door through a small opening and is sealed with a nut and washer.

The next step is inspecting the door rollers for proper functioning and this should be followed with the inspection of the alignment and condition of the spindles. A newer substitute must be brought out if the roller is broken. The oiling of the spindles, roller bearings and also the pins inside the door hinges must be performed semi-annually.

Overhead garage doors move upwards along a set of metal tracks. The single piece category has two such panels which are hanging from the axle on the ceiling. Sectional garage doors also have a pair of tracks which curve as they come down on either side. The door is held in place and on course by using a set of rollers mounted on brackets. If you have enjoyed our article on garage doors get more great information on Garage Roller Door.

The metal tracks must be leveled out or bent inwards towards the garage and should be clean. Bent tracks will hinder the smooth rolling movement of the door. Dirt particles and debris will be a constraint on the movement of the rollers.

Check the regularity of the horizontal section and plumbing of the vertical one. The tracks should be spaced apart in such a way that they are parallel to each other. The tracks should be slightly loosened and the tightened again into place in case they are not parallel.

Tighten the brackets after making this adjustment. Cleanse the tracks from the inside and spray silicone lubricant on it. Strong and springs with major tension are used to bond to the door via braided cable. They assist the operator in lifting and closing the door.

The tensile strength of the heavy duty spring is enough to tightly clasp the garage door at a height of about three feet from the floor. After it has reached this equilibrium height, it can rise automatically beyond this point. Before undoing the spring for maintenance, check the other components for functioning and lubrication.

To adjust the tension spring, the positioning of the S hook, located at the end of the braided cable, need to be changed. There is an overhead bracket with holes into which both such hooks fit. The door needs to be elevated and clampers can be used to hold it. Set the tension by moving the hooks to the desired level but be careful to make equal adjustments on both of them.

The adjustment of the torsion springs is possible using an iron bar which goes into a slot at the end of the spring. This adjustment procedure is actually not as simple as it sounds but quite risky on the contrary. The torsion spring adjustment is best left to a professional.

He had seen scores of places as a child because his father was in the Navy. In the fifth grade, they were living in Bremerton, Washington, and his father’s submarine tender was sent to the shipyard to be overhauled. The most pleasant recollections from that time are the trolling for trout in the Lake Tiger and the visit to the race-car garage in the small lane behind their house. Weekdays would see him standing at the garage door, watching the mechanics at work with earnestness, as they fixed up the small racing car for the races.

The idea of heating that garage never entered his mind then, although it occupies a lot of his thoughts now. Heating a house or an office space is another matter compared to heating a garage. For example, a garage door left open on a windy day can suck out all the warm air in an instant. More expert garage doors information is located at garage door.

A smart way is to employ radiant heat to heat such places. A giant radiator is connected to the floor and it radiates a great sum of heat that balances the heat loss from the open doors without any difficulty. The radiant floor supplies continuous heat even when the doors are up not unlike the sun on a breezy morning.

One thing that you are bound to find in a garage is used oil, and so, it is wise to install a waste oil boiler to serve as an energy source. Especially because waste oil is there, and even otherwise, the inclusion of a snow-melt system is a great plan. At a minimum a snow-melt system should be installed in the pad outside the garage doors about 5 feet out. This holds off the plows from the doors of the garage. Most garages also have ramps, and a snow-melt system will make sure that the entry and exit through the ramp is safer than before.

In working with vehicle maintenance, the garage doors have to be opened and shut every hour. Garages that are used for repairing equipment could be opened daily. Storage garages can be opened once in a month. One has to take a different approach for taking care of a working garage than that of one used only for storage. To get more information on garage doors visit roller doors.

While the doors are coming down, the garage’s temperature must not vary. In garages that open daily and maintain temperatures of around 60 to 65 degrees F, the workers work in peace while wearing only two layers of clothing. If you want to work in peace, then ensure that the floor is kept at somewhere in 60-75 degrees F, and that it never shoots past 85 degrees F. Cold floors are not advisable as they can drain the worker of his energy. Conversely, too warm a floor might just entice some of the men to take easy naps on the floor!

The best way to maintain the floor at just the right temperature range is to use a slab sensor. In the case of garages that do repair and storage, simply using the floor as the only heating source suffices. Even though a thermostat will work just fine in controlling the temperatures in such a situation, you can use a slab sensor for better control and more comfort.

Here are other factors that one should have in mind. Garages that need to perform excessive engine running, solvent use, and paint jobs, have to have a ventilation and exhaust system working well always. The warm air is thus sucked out pretty soon of the room. This deficit can be made up only by the heating system. Most of the garages have a steel frame with aluminum sidings or are made of concrete blocks. Constructions made of concrete blocks are poorly insulated and has abnormal infiltration rates as well.

Aluminum sided buildings can also have the same. Thus, the latest method of insulation should be taken as a major aspect of the construction and design of the garage. This major factor should not be passed over in the modernization of old garages too.

A layer of insulation, when applied to the border of the slab all around, can greatly reduce the amount of heating the space requires. What is usually used is two inches of polystyrene. [spin]Floor drainage in a garage is very important if the garage is being used to provide overnight storage for vehicles that return with snow and ice on them each day. |In some garages where vehicles with snow and ice on them are kept overnight daily, the floor drainage becomes an important issue. |Garages in which vehicles having snow/ice on them are kept overnight on a regular basis have to have an efficient floor drainage system. |Floor drainage becomes quite important if your garage is such that vehicles having snow and ice all over them are frequently kept in the garage all through the night. |An effective floor drainage system becomes central to garages that have to deal with vehicles with snow and ice on them being kept all night regularly. |In garages that have frequent entry of vehicles that have snow and ice on them and are kept there during the night, the floor drainage becomes a vital point of concern. |The drainage from the floor becomes a moot point in garages that have a lot of vehicles coming in for the night that have snow and ice on them. |If the garage is providing all night storage to vehicles having snow and ice on them then the floor drainage has to be really effective and has to be efficient at all times. |Garages providing all night space for storage of vehicles that have snow and ice on them frequently, the floor drainage becomes a major point of concern. |Whenever garages have to provide storage for vehicles having snow and ice on them, that too on a regular note, the floor drainage becomes a significant matter of worry. [/spin

If style lives at your abode, and then it certainly parks in your garage. It has been found out that there is a paradigm shift in the focus on the garage as a consequence of the presence of more than 65 million one, two or three car garages in the United States as reported by the U.S. Census Bureau. Inverting the garage doors is the latest trend as homeowners are keen to have a garage at the house entrance. To lend a new look to your house you can just revive the garage door.

Besides displaying the house owner’s taste in interiors the door plays a big role in deciding the layout of the entire house One of the styles of the garage doors that have become immensely popular is the carriage house style which replicates the traditional, swinging barn door styles. They might resemble the traditional doors, but they still open overhead like any other modern garage door. The reason why Old world style doors are becoming the hottest thing is the fact that these have a Mediterranean appeal to them. This style is also famous as it provides lots of hardware options including a traditional vertical grooved look, which works great with finely plastered homes. We hope you like our article on industrial roller doors and the broader topic of garage doors.

The ultimate purpose of the garage door is to ensure the safety of the car, however some attempts to make it look great can be fun. Wood, steel and now composite are sufficient to make garage doors and their benefits and prices may vary widely. It is rare to see garage doors made of solid wood as they are traditionally expensive, extremely heavy and require a higher level of maintenance.

Easy susceptibility to dents is a drawback for otherwise inexpensive and lightweight steel doors. New garage doors that have come in the market are made from composite materials are lighter in weight and highly durable. What is evident is that their advantages include high quality style and appearance, a moderate price and reliability.

According to the National Association of Home Builders the makeover trend doesn’t stop at the garage door with the U.S. homeowners who are increasingly remodeling the inside of their garages to the tune of $2.5 billion based on 2005 figures. Garages are being used for several other purposes like bonus rooms or storage spaces. Some of these tips for garage makeovers are quite good and advantageous to homeowners and builders. Our garage doors article is further discussed at automatic garage door.

well placed style statement is a must to make your garage look good. The visual appeal is under much scrutiny as architects stress on the design. Garage styling is no longer limited to restricted options but there is much more than you can even think of. Carriage House and Old World styles are a good match for Craftsman as well as Mediterranean style homes.

Window inserts should be carefully chosen to bring in the light. Homeowners are given the option of choosing from a huge variety of arched, rectangular or square window inserts for their garage doors which also provides detailed design accents and natural light. The window inserts are a necessity if a homeowner needs to use their garages as living spaces such as a workshop, utility room or children’s play area. Not just do they bring in light but also add to the appeal of the area

The place should be nicely organized. Large amount of money is being spent by homeowners who want to redesign their garage spaces to accommodate areas for purposes like storage or gym, etc. Now if you also want to create that extra bit of space, go for the garage storage system.

The choice of materials is crucial and it should be made wisely. Steel and composite have become more popular than wood today. For economic reasons, a larger chunk of people have switched to composite and steel from the costly and less durable wooden doors. To face the harsh weather conditions one can install a wood composite garage door.

It is easy to create zones where more than parking can be done. Do think about redesigning your garage space so that it has a room for a workout room or a recreation and play area. One more thing of major importance is that the garages a place not only attractive for cars, but also for people. A little effort to clean and re do the garage can add a great deal of style to your garage.

They say style resides at home, so it would not be wrong to consider the garage as the place where it parks. It has been found out that there is a paradigm shift in the focus on the garage as a consequence of the presence of more than 65 million one, two or three car garages in the United States as reported by the U.S. Census Bureau. As the garages have become the entrance point to homes, owners are investing more on garage doors. A new fresh look can be given to your garage just by simple updating and modification of the garage door.

It is rightfully stressed that the style of the garage door should reflect not only the homeowner’s personal style but also help maintain the architectural integrity of the house. Many styles of garage doors are gaining popularity with the people but the most popular style is carriage house style which replicates the traditional, swinging barn door styles. But they resemble modern garage doors in one aspect; they open overhead like any other modern garage door. The reason why Old world style doors are becoming the hottest thing is the fact that these have a Mediterranean appeal to them. Many stucco style home owners prefer old world style doors owing to their vertical grooved look. The style offered have numerous hardware alternatives which are perfect for stucco homes. We hope you like our article on automatic roller door and the broader topic of garage doors.

However the stress is still laid on the functionality of the garage door as the garage is still a garage although style is important for curb appeal. Composite, wood and steel are the modern day material choices for your garage door; however it is best to consider your exact needs and budget when making a decision. Wooden doors are heavy, and need regular maintenance hence people have switched over to other lighter materials to craft doors.

Steel garage doors offer low maintenance and affordability, yet are susceptible to dents. These days, garage doors made from composites have caught the eye as they are lighter and highly durable. If you have been scouting for something worth your money, the uber chic composite doors are your best bet.

According to the National Association of Home Builders the makeover trend doesn’t stop at the garage door with the U.S. homeowners who are increasingly remodeling the inside of their garages to the tune of $2.5 billion based on 2005 figures. Garages are becoming multipurpose serving as bonus rooms or storage spaces. Here are a few quick tips that can be followed when remodeling your garage. Our garage doors article is further discussed at garage door.

There should be a proper coordination of various style combinations. Constant emphasis is laid on the design strategies to improve visual appeal by the architects on hand, while the manufacturers have responded to the garage makeover trend by offering a variety of styles on the other. Manufacturers have also understood this new trend of makeovers and have created a variety of styles for them. The styles which suit the craftsman and National Association of Home Builders are Carriage House and Old World styles.

Window inserts should be carefully chosen to bring in the light. Rectangular, Square and arched versions of inserts can be picked to ensure maximum light in the garage besides emphasizing on the look. With the increasing desire among homeowners wanting to use their garages as living spaces such as a workshop, utility room or children’s play area, the window inserts are quite important. Not just do they bring in light but also add to the appeal of the area

The place should be nicely organized. Families are spending significant dollars to renovate their garage space for multipurpose uses including hobby and storage areas. Opt for a garage system to include some extra space.

The materials to be used should be wisely chosen. Steel and composites have become the ‘go to’ choice for people as wood has taken a back seat. Wood requires a lot of care and on the contrary the composite material and steel are maintenance free and affordable too. To face the harsh weather conditions one can install a wood composite garage door.

In order to include a workout room or a recreation and play area, multifunctional spaces can be created by renovation of garage spaces. Consider renovating your garage space to include a workout room or a recreation and play area. The increasingly popular notion is that the attraction of the garage space should be for people and not only for cars. The gorgeous and elegant appeal to your garage space is lent by Fresh paint, clutter free zones and a bright environment.