Sos Roofline Systems

Posts Tagged ‘handyman’

As with all projects preparation is the key to a good finish and successful project, the end finish of any job is all in the preparation work that is put in prior the job starts. Any professional tradesman will tell you the same thing, you require the right tools and equipment at hand before you even start the job. Without the right preparation the job will suffer and you will make life hard for yourself.

To prepare yourself for the job of plastering a room will need a number of items for the job, this may vary on what type of job it is, you will need some additional equipment if you are undertaking the re-plaster of a full ceiling as opposed to re-plastering a wall as the job has different methods in order to achieve a quality finish.
Prepare yourself by having a good night’s sleep, you will definitely work better if you are not tired, wear comfortable clothing, this may sound a bit stupid but if you intend to work all day then there is nothing worse than feeling uncomfortable. The day before you plan to start the job, get all your tools and materials organised so you’re not rushing around in the morning before, and getting yourself stressed out.

To re-skim a room, walls or ceiling you will require some tools, probably the most famous of all plasters tools is the good old float, this is the most important part of your kit, GA plasterers Liverpool recommend a stainless steel float as they produce a good finish and do not drag on the plaster work, really this is the tool for the job. You are also going to require a hawk board this tool is flat aluminium or plastic board with a handle underneath and it is used to carry small amounts of plaster that is ready to be applied.

A mixing bucket and a clean water bucket is also needed, the mixing bucket should ideally be the flexible type as they are real easy to clean and the last as well. The other bucket you will need for your clean water, this bucket is kept on the project while you are working and is used for cleaning your float and applying water to the walls during the finishing stages of your re-plastering job. A paint brush is also another essential, the paint brush is used for removing marks and imperfections out of the plaster and is also used to wet up the walls during the polishing stage. You will also need some type of platform to stand on, plasterers in Liverpool recommend the folding aluminium type, but a milk or beer crate will do if you don’t own a aluminium platform.

Another good tip is to have a hose pipe set up where you intend to do your mixing, this will serve two purpose’s one it will provide clean water for mixing and two you will be able to clean the work are after you have finished work, if there is no water supply you can call GA plumbers Liverpool or a handyman Liverpool or any other local tradesman to fit one for you.

Installing a mixer shower is normally a procedure for a skilled and experienced plumber, with a few trade tips a competent DIY enthusiast can carry out this task without any major problems accruing. Installing this type of shower can be a little tricky so if you don’t feel 100% confident I would advise you to employer the services of a suitable expert plumber.
Being prepared is important; before you start the job make sure you have all your tools and materials at hand. You will need basic plumbing tools, copper or plastic pipe and an electric drill. You will also so need some kind of plaster to fill in the channels in the wall to conceal the pipe work; GA plasterers Liverpool normally use a rapid set sand and cement mix for this purpose. You will also need a bucket, trowel and a tube of silicone sealant complete with a sealant gun.

The best place to position the shower unit is at the end of the bath where the taps are situated, this will reduce the pipe work that is needed in the plumbing process. Ensure that the wall where the shower valve is going to be placed is suitable to mount the shower valve, I would not recommend mounting the shower unit on a wall that is constructed of plaster board as this type of wall construction can be very flimsy. The best type of wall to mount the shower unit on is a brick or block wall as the strength a rigidity is a lot better to support the shower body.

The first step is to channel out two slots in the brick work, roughly at 150mm between the centre of the pipes, most mixer showers have their water in lets at this centre distances but there are a few exceptions so it is worth reading the installation instructions be for you start the installation process.
The next step is to run in two pipe for the hot and cold feeds, normally the hot is on the left and the cold is on the right, but again it is worth checking before you start the installation. You can use either plastic or copper pipe for the procedure, GA plumbers Liverpool use plastic pipe with push fit fittings as it a lot easier to work with and it actually costs a lot less. It also eradicates the need for pluming tools that can be expensive to buy. Now with the water supply turned off cut into the hot water supply and connect the left hand side pipe in the wall to the hot supply pipe using a suitable size T connection, then repeat the same job with the cold supply pipe.

At the top end of the pipes (the shower unit end) fit a suitable elbow to each of the pipes with a short piece of pipe in echc that is cut to the richt size to accommodate the shower valve. Every shower is different so the size of the pipes will vary. Now fir the shower unit to the pipes and tighten the connections, fix the shower valve to the wall and turn on the water to check for leaks, fill in the channels that you have made to conceal the pipe work, and that’s it procedure done. You may need a bit of tiling work but if you can’t tile yourself call a handyman Liverpool to do the task for you.

Installing a new bath is normally a task for a skilled and experienced plumber, the actual job of fitting a brand new bath is pretty simple if you follow a few simple guide lines. Most of it is just plain old common sense stuff but there are a few trade tricks that only come with experience that one would need to have spent time sometime in the plumbing game or bathroom fitting trade.

But for the first time plumber a will reveal a few trade secrets so you the DIY enthusiast will be able to use so that the installation of your new bath tub will go as smoothly as it possibly can.

1; Turn of the water supply to the property, this sounds so obvious but it essential to avoid an damage to the rooms that are directly below your upstairs bathroom. You should be able to turn your water of via a stop valve, that can be found in various locations depending on the house. If you cannot find the stop valve the water supply can be turned off by the mains valve which is normally located under an access panel in the road or street. If you have a gravity fed hot and cold water system, the type where there is a water tank in the loft or attic, then you should be able to find two shut of taps on the pipes at the very bottom of the tank. Once the water supply is isolated you can start to remove the bath.

2; Remove the old bath, by disconnecting the cold and hot supply pipes at the connection at the tap, you may need to buy a special tool for the purpose as access is extremely limited. Once you have disconnected the hot and cold supply’s carefully un-do the trap from the waist. Now with a pry bar separate the old bath from the wall and remove to a suitable place. Before you fit your new bath inspect the walls behind the bath, if the walls are damaged repair them with a suitable plaster, GA plasterers Liverpool use bonding plaster for the job.

3; Now assemble the bath and fit all the taps and the supporting legs, place the bath in situ and level up the bath tub with a suitable spirit level. Make sure all the sealing surface are properly sealed GA plumbers Liverpool use plumbers mate for this job as it remains flexible and produces an excellent seal that lasts. When the above steps are complete reconnect the water supply pipes to the taps and the trap to the waste use ptfe tape on the threaded joints. Now you can seal the bath, with a sealant gun and a suitable silicone sealant run a bead of silicone sealant around the upper edges of the bath that meets the wall, fill the bath with water and wait twenty four hours until the sealant is completely set, job done. If you don’t fancy doing the job yourself why not call a handyman Liverpool who will carry the work for you.

A screw that has been subjected to wear, nicks and other damage, or rusting can be difficult to remove. Fastener would not be that reliable when threads would be fully damaged thus it would be very difficult to remove. Air and water are the two major reasons why screws get rusty in time. Exposing screws to these two for a long time could result to a chemical reaction thereby producing rust. Corossion can not only damage the screw but the machine too. The rust could eventually spread if the screw will now be removed.

Removing a Stripped Screw
While it is doable to obtain a specialized stripped screw removal kit, in quite a few conditions the work could be accomplished applying a regular set of resources. 1 in the important factors in fastener elimination requires slippage. It is important to apply control to move the destroyed screw inside a counterclockwise direction, but utilizing insufficient force or an improperly sized device might lead to your grip to slip aside. For this reason, a handbook screwdriver might at times be far better suitable than a power drill, as it lets you utilize a lot more stress, and thus additional friction, to rotate the screw with out slipping. A socket wrench can also be utilized to employ further torque because it provides much more arm leverage than a screwdriver, raising the amount of stress applied from your same degree of physical exertion.

A screwdriver that neglects to achieve leverage towards the stripped screw might be tapped with a hammer to position it effectively. If the screw mind is broken, a screw extractor, which functions particular tapered threads made to look to the screw to rob torque, could be a beneficial answer. The extractor is usually handled as being a regular screwdriver, but if it fails to catch a grip, it might be essential to drill a hole straight in the screw shaft so the extractor threads might acquire tissue traction expansion. When doing so, it is important not to drill too significantly, as that may perhaps destroy the mind totally or weaken it enough for it to detach.

Getting rid of a Rusted Screw
A screw that is certainly open to moisture for any prolonged period will start to acquire rust at a rapid pace. This could allow it to be as challenging to get rid of as a stripped screw, which enable it to eventually cause to degradation in the good quality of the gadget in which the screw is inserted. If rust has corroded the threads or degraded the screw mind, the fastener could be challenging to grip using a screwdriver or a wrench, requiring a diverse range of options than individuals efficient for stripped screws. In instances of extreme rusting, there are many out there possibilities, which includes:

-Cutting: If a rusted fastener would no lengthier be salvaged, cutting it out may perhaps be the final viable option. A splitter, cut-off wheel, or effective shears can be used to slice it, though they’ll make the screw unusable for long term projects. Similarly, utilising a vise-grip to draw off the screw mind and get rid of it from the slot will completely break the screw.

-Torching: A low-powered gas torch would usually solve a rusted fastener problem. Completely heating up a screw may possibly lead to it to expand ample for being loosened from its slot. It is necessary, on the other hand, to stick to security guidelines when hiring a torch or any other mechanical unit, especially mainly because some screw lubricants or coatings are flammable and may ignite when set below a flame.

-Lubrication: Lubrication may perhaps be a simpler screw removal selection, since it relies on comparatively little products to be successful. Different kinds of industrial or commercial lubricants could penetrate with a fastener’s threads. Following utilize a lubricant, tapping the screw mind will help it pass via the fitting and reach the screw shaft, loosening the screw enough being eliminated with pliers or even a screwdriver.

Now that you just know the easy methods to eliminate a corroded screw from the machine, now its time to also write about this basic tactics for your friends and grow to be a handyman at your personal home!

Handyman Services for the Greater Toronto Area. No job is too small. Specializing in small home improvement renovations. You name it, we fix it! “On time, honest & reliable!” Call us today: 647 746 8414 Or Visit our website for more details on our services.

Is your old floor tired and stained? Looking for an inexpensive and modern solution that’s easy on the eye?

One of the benefits of a floating floor system is that it is possible to install these products on practically any surface making this system a very popular option for both professional flooring installers and the typical handyman or woman.

Floating floor systems remove the headaches caused by the more conventional flooring options. There is usually far less floor preparation involved, faster turn around time from the start to completion of your flooring project, is less labour intensive, saves the hassle of having to install batons or masonite, does not cause height or trip hazards when connecting to other floor coverings such as carpet, and can often save you up to 50% of cost compared to conventional flooring alternatives.

Vinyl floating floors have become increasingly popular for many reasons. It’s versatile and long lasting characteristics make this product and easy choice for many flooring applications. The development of vinyl flooring within both the domestic and commercial markets now offers an extensive array of sheets, tiles, planks and are commonly available in modern and traditional styles, colours and patterns.

Installation of Your Vinyl Floating Floor
Estimating the correct required amount of materials is crucial. If you over estimate, you waste money, if you under estimate you can always purchase the amount that fell short however you run the risk of mixing two different dye batches together and creating a colour variation. Draw yourself a basic sketch of the area, measure the width and length of each room or section. For example, the kitchen might be 4 meters x 3 meters totaling 12 square meters. Repeat this for each room, total up the square meters for each room/section, then add 10% to the total to give you your final estimate of the required flooring materials.

Generally speaking, floating floors are adaptable. In most cases you can successfully install your new floor directly over the top of the existing vinyl, timber, or concrete floor. The nature of the floating floor system will disguise most minor abnormalities with regards to your existing floor. However always eliminate any bumps or large cracks before the installation.
Check for moisture. If you are unable to access a moisture meter, use a small section of the vinyl floating floor and place it in the appropriate area for at least 24 hours so you can detect moisture problems. As a precaution, always loose lay a plastic barrier directly to the existing floor.

Now, it’s time to lay the flooring. After you lay the plastic moisture sheets, commence installation of the underlay foam. Prior to laying the floating floor, we recommend to leave half an inch gap from the wall. Use spacers to maintain expansion consistency. This is one of the most crucial factors and is necessary in case the floating floor swells. Commence laying the floor from the farthest distance point of the doorway. Make sure the floor groove side faces the wall. Apply small amounts of wood glue in the panel grooves tapping gently with your rubber mallet. For large open spaces, ensure to allow for expansion provisions every 30 linear feet. Apply an industry standard joint sealant. This same sealant should be applied to connecting wet areas.

Prevent any foot traffic for at least 24 hours after installation.

Looking for more flooring tips and resources? Visit our carpet Brisbane and flooring website for expert tips and articles for your next project.

Get important tips about how to install suspended ceiling – please study the web site. The times have come when concise information is really within one click, use this possibility.